Brother MFC-8220 - For USB Interface Cable Users; For Mac os 8.6 to 9.2

46
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 4 - 11.
1
Switch off and unplug the MFC from the AC
outlet and disconnect it from your
Macintosh
®
if you already connected an
interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM for Macintosh
®
into your CD-ROM drive.
4
Double-click the Start Here icon to install
the printer, scanner and PC-FAX Send
drivers. If the language screen appears,
select your language.
5
Click Install next to the MFL-Pro Suite for
your country.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the MFC.
DO NOT connect the MFC to a USB
port on a keyboard or a non powered
USB hub.
8
Plug the MFC into the AC power outlet. Turn
the power switch on.
9
From the Apple
®
menu, open the Chooser.
For USB Interface Cable Users
For Mac OS
®
8.6 to 9.2
Step 2