Brother MFC-8220 - Load Paper in the Paper Tray

6
Setting Up the Machine
1
Pull the paper tray completely out of the
machine.
2
While pressing the paper guide release
lever, slide the adjusters to fit the paper
size.
Check that the guides are firmly in the slots
on the tray.
3
Fan the stack of paper well to avoid paper
jams and misfeeds.
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back in the
machine and unfold the support flap before
you use the machine.
4
Load Paper in the Paper
Tray
For Legal size paper, press the universal
guide release button and pull out the rear of
the paper tray.
Paper Guide
Release Lever
Universal Guide
Release Button
For details on supported paper
specifications, see “About paper” in Chapter
2 of the User’s Guide.
Up to here.
Support
Flap
Step 1