Brother MFC-8440 - For Parallel Interface Cable Users (for Windows 98;98 Se;Me;2000 Professional;Xp)

21
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 9.
1
Switch off and unplug the MFC from the AC
outlet and disconnect it from your computer,
if you have already connected an interface
cable.
2
Turn on your computer.
(For Windows
®
2000 Professional/XP, you
must be logged on as the administrator.)
3
Insert the supplied CD-ROM for Windows
®
into your CD-ROM drive. If the model name
screen appears, select the MFC. If the
language screen appears, select your
language.
4
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
For Parallel Interface Cable Users
(For Windows
®
98/98SE/Me/2000 Professional/XP)
■ Brother recommends you connect the
machine directly to your computer.
■ Please close any applications running
before installing the MFL-Pro.
If this window does not appear, use
Windows
®
Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.
If you see the following screen, click OK to
install the Windows
®
updates. After the
updates are installed your PC may restart.
Note: If it does the installation will
automatically continue.
If the installation does not continue
automatically, please open the installer
menu again by double-clicking the
setup.exe program from the root directory of
the Brother CD-ROM, and continue from
Step
4
.
Continued ...
Installing the Driver & Software
Setting Up
the Machine
Windows
®
USB
For
Administrators
Windows
®
Parallel