Brother MFC-8440 - Set Your Country (for Australia; New Zealand Customer Only)

6
You must set your country so that the MFC works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
plugging in the power cord and turn the
power switch on.
Press Set.
2
Press or to select the country
(AUSTRALIA or NEWZEALAND).
3
Press Set when the LCD shows your
country.
4
The LCD prompts you to make sure of the
country again.
5
If the LCD shows the correct country, press
1 to go to Step
6
.
—OR—
Press 2 to go back to Step
1
to select the
country again.
6
After the LCD shows Accepted for two
seconds, it shows Please Wait.
6
Set Your Country
(For Australia / New Zealand Customer only)
Set Country
Press Set Key
Set Country
▲ Australia
▼ Newzealand
Select ▲▼ & Set
Set Country
Australia
1.Yes
2.No
Enter Number
Set Country
Australia
1.Yes
2.No
Accepted
Setting Up the Machine
Step 1