Brother MFC-8440 - Workstation Version 4.0 Users

31
Make sure that you followed the instructions from Step 1 “Setting Up the
Machine” on pages 2 - 9.
1
Turn on your computer.
You must be logged on as the
Administrator.
2
Connect the parallel interface cable to your
computer, and then connect it to the MFC.
3
Plug in the power cord and turn on the MFC.
4
Insert the Supplied CD-ROM for Windows
®
into your CD-ROM drive. If the model name
screen appears, select the MFC. If the
language screen appears, select your
language.
5
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
For Windows NT
®
Workstation Version 4.0 Users
■ Brother recommends you connect the
machine directly to your computer.
■ Please close any applications running
before installing the MFL-Pro.
If this window does not appear, use
Windows
®
Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.
If you see the following screen, click OK to
install the Windows
®
updates. After the
updates are installed your PC may restart.
Note: If it does the installation will
automatically continue.
If the installation does not continue
automatically, please open the installer
menu again by double-clicking the
setup.exe program on the Brother
CD-ROM, and continue from Step
5
.
Continued ...
Installing the Driver & Software
Setting Up
the Machine
For
Administrators
Windows
®
Parallel
Windows
NT
®
4.0
Parallel