Brother MFC-8440 - Setting up Your USB-Equipped Apple Macintosh; Using Your Machine with a Macintosh

USING YOUR MACHINE WITH A MACINTOSH
®
7 - 1
7
Setting up your USB-equipped Apple
®
Macintosh
®
The features supported by the machine will depend on the operating
system you are using. The chart below shows which features are
supported.
*1 For the details of ControlCenter2.0, see
Using ControlCenter2.0
(For Mac OS
®
X 10.2.1 or greater)
on page 7-30.
*2 For Mac OS
®
X 10.2 users, please upgrade to Mac OS
®
X 10.2.1
or greater. (For the latest information for Mac OS
®
X, please visit
at: http://solutions.brother.com)
Using your machine with a
Macintosh
®
■
Before you can connect the machine to your Macintosh
®
,
you must buy a USB cable that is not longer than 1.8 metres.
Do not connect the machine to a USB port on a
keyboard or a non-powered USB hub.
■
Some descriptions in this chapter are based on the
MFC-8840D. These descriptions also apply to the
MFC-8440, DCP-8040 and DCP-8045D.
■
The screens shown in this chapter are from MFC-8840D.
Feature Mac OS
®
Mac OS
®
X
8.6 9.X 10.1 10.2.1 or
greater
*
2
Printing Yes Yes Yes Yes
Scanning (TWAIN) Yes Yes No Yes
ControlCenter2.0
*
1
No No No Yes
PC-FAX sending Yes Yes Yes Yes
Remote Setup No No Yes Yes