USING YOUR MACHINE WITH A MACINTOSH
®
7 - 11
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
■
If a Brother Native Driver (MFC-8440/8840D) is already
listed in Printer list, you will need to delete it and then install
the PS driver.
■
To use the PS driver with a USB cable, you need to set the
Emulation
to
BR-Script3
(For MFC-8440 and
MFC-8840D,
Menu
,
4
,
1
. For DCP-8040 and DCP-8045D,
Menu
,
3
,
1
.) before connecting the USB cable. (See
Setting
the Emulation Selection on page 1-18.)
1
Select Applications from the Go menu.
2
Open the Utilities folder.
■
If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”,
only one printer driver for a machine can be registered in
Print Center.
To Next Page
Loading...
