7 - 46 USING YOUR MACHINE WITH A MACINTOSH
®
Before finishing the Copy button configuration, you must set the
Printer Name. Then select your print settings from the Presets
pull-down list, then click OK to close the window. By clicking the
configured copy button, the print dialog window will open.
■
You must configure each of the copy buttons before they can
be used.
■
By using the Copy button, you can also send a fax using the
printer driver. (See Sending a fax from your Macintosh
®
application (For MFC-8440 and MFC-8840D only)
on page
7-14.)
To Next Page
Loading...
