Brother MFC-8510DN - 4. Screw Torque List

142
2.Fax
(Continued)
2.Setup Send
(In FAX mode
only)
(Continued)
8.Overseas Mode — On
Off*
If you are having
difficulty sending
faxes overseas, set
this to On.
See .
9.Destination — Display*
Hidden
Sets the machine to
display the
destination
information on the
LCD during fax
sending.
3.Address Book 1.One Touch Dial — — Stores up to 16 One
Touch Dial numbers,
so you can dial by
pressing one key (and
Start).
48
2.Speed Dial — — Stores up to 300
Speed Dial numbers,
so you can dial by
pressing only a few
keys (and Start).
50
3.Setup Groups — — Sets up to 20 Group
numbers for
Broadcasting.
See .
4.Report Setting 1.Transmission — On
On+Image
Off*
Off+Image
Sets initial setup for
Transmission
Verification Report.
28
2.Journal Period — Every 50 Faxes *
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 Days
Off
Sets the interval for
automatic printing of
the Fax Journal.
See .
Level 1 Level 2 Level 3 Level 4 Options Descriptions Page
Advanced User's Guide
The factory settings are shown in Bold with an asterisk.