Brother MFC-8510DN - 8. Disassembly Flow Chart

158
7.Network
(MFC-8910DW)
(Continued)
2.WLAN 1.TCP/IP 1.Boot Method — Auto*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method that
best suits your
needs.
See .
(IP Boot
Tries)
— 00003*
[00000-32767]
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method is
set to any setting
except Static.
2.IP Address — [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
3.Subnet Mask — [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4.Gateway — [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Node Name — BRWXXXXXXXXXXXX Enter the Node
name.
(Up to 32
characters)
6.WINS Config — Auto*
Static
Chooses the WINS
configuration
mode.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
Network User's Guide
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.