DO
NOT inhale the toner powder, if toner powder is inhaled,
please
follow these steps
immediately:
•
Move to an
area
with plenty of fresh air.
•
Gargle and rinse your mouth out with plenty of water.
•
if you develop a cough or any other symptoms soon after inhaling the toner, consult your
doctor immediately.
if toner powder is swallowed, rinse your mouth immediately and drink plenty of fresh water to
dilute the toner.
Then
consult your doctor immediately thereafter. For more safety information
regarding the toners used in your product,
please
visit the following web address to read the
Safety
Data
Sheets
http://sds.brother.co.ip/sdsapp/index.htmi, which include important
information about the chemical composition of the toners and the precautions to take in
case
of
overexposure
to toner.
A HOT
SURFACE
After you have just used the product, some internal parts of the product will be extremely hot.
Wait
at least 10 minutes for the product to cool down before you touch the internal parts of the
product.
(MFC
and DCP only)
When
moving the product, grasp the side handholds firmly from the
front
of the product. The
side
handholds are located under the
scanner.
DO NOT carry the product by holding it at the
bottom.
. - ,
To Next Page
Loading...
Need help?
General
