Brother MFC-9070 - Install Brother Native Drivers for Windows XP; Add Printer Wizard for Native Driver; Native Driver Installation and Test Page

3
10. The model you are installing will be
listed in the window. Select Yes or No
if you want this driver to be your
default printer.
11. If the above screen appears select
“Do not share this printer” and
Next.
12. Select “Yes” and Next to print a test
page.
13. When the above screen appears click
Finish.
14. If the Windows Logo testing screen
appears click Continue Anyway. This
completes the installation of the
Brother Native Driver.
Note: There will be two Brother printer drivers listed
in the Printers and Faxes selection. The driver
without hyphen in the model name
(Ex. Brother MFC9070) is the Brother Native
Driver.
Installation of Brother Native Drivers for Windows
®
XP
Before You begin
• Please complete steps 1 to 7 of the “Setting Up the machine and PC to Work Together” before you install the Brother Native Driver.
• Make sure that the interface cable is connected between the machine and your PC and they are both powered ON.
Step 8.
Click “Start” and select “Printers and Faxes”
Step 9.
Click on “Add a printer” and the Add Printer Wizard will start.
1. When the above screen appears,
click Next.
2. Un-check the “Automatically detect
and install the Plug and Play
printer” selection and then click
Next.
3. Select “BMFC (Brother MFL Port)”
from the pull down window for the
Printer Port Selection and then click
Next.
4. Click on Have Disk.
5. Browse the CD-ROM and highlight
your language folder and click Open.
Highlight the “WXP” folder and click
Open. Highlight the “Addprt” folder
and click Open.
6. Click Open. 7. Make sure “X:\xxx\WXP\Addprt” is
displayed in the window and click OK
(X:\ is the drive letter of your
CD-ROM).
8. Highlight the model you are installing
from the list of machines and click
Next.
9. If the above screen appears select
“Replace existing driver” and Next.