What causes regular markings on Brother MFC-9760 All in One Printer printed pages?
Regular markings on printed pages from your Brother All in One Printer may be caused by the surface of the drum being marked or damaged by excessive exposure to light. Markings may disappear by themselves. Try copying multiple pages to clear this problem. If the machine has not been used for a long time, replace the drum unit with a new one.
Why does my Brother MFC-9760 say 'Change Toner'?
The 'Change Toner' message on your Brother All in One Printer indicates that the toner is depleted and will soon run out. It's recommended to order a new toner cartridge.
Why does my Brother MFC-9760 All in One Printer say 'Change Drum Soon'?
The 'Change Drum Soon' message on your Brother All in One Printer appears because: - The drum unit is near the end of its life. If you have a print quality problem, replace the drum unit with a new one. - The drum counter was not reset after a new drum was fitted. Open the front cover and press Clear Settings, then press 1 to reset.
How to fix dark or light printouts on Brother MFC-9760 All in One Printer?
To fix printouts that are too dark or light on your Brother All in One Printer, adjust the print conditions by setting the Print Density function. The Print Density function has been factory set to the middle position.
How to resolve 'Out of Memory' error on Brother MFC-9760 All in One Printer when printing?
If your Brother All in One Printer displays an 'Out of Memory' error when printing: - Press Reset to delete data remaining in the machine's memory. - If you have installed the Windows® driver, try again after setting the True Type mode to 'Print as Graphics' in the PRINT menu of your application software. - Reduce the print resolution or reduce the complexity of your document. - Expand the printer memory with the optional memory board.
What does 'Pls Open Cover' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'Pls Open Cover', a page, piece of paper, or paper clip may be jammed inside the machine. Open the front cover and remove the drum unit. If you see any jammed paper or other item, gently pull it out. Reinstall the drum unit, then close the front cover. If the error message remains, open and close the front cover again.
What does 'Cooling Down' mean on my Brother MFC-9760?
The 'Cooling Down' message on your Brother All in One Printer indicates that the temperature of the drum unit or toner cartridge is too hot. You must wait and allow the machine to resume printing when it is ready.
What does 'Cover Open' mean on Brother All in One Printer and how to fix it?
If your Brother All in One Printer displays 'Cover Open', the front cover was not completely closed. Open, then close the front cover.
What to do if Brother MFC-9760 All in One Printer pages are smeared?
If printed pages from your Brother All in One Printer are smeared, it could be due to rough surfaces or thick media. Make sure you select the correct Paper Type that suits the paper in your paper tray.
What to do if Brother MFC-9760 pages are stained with toner?
If printed pages from your Brother All in One Printer are stained with toner or have vertical stripes, clean the machine’s interior and the primary corona wire of the drum unit. Make sure that the tab of the corona wire is at the home position. If, after cleaning, the issue persists and the display shows CHANGE DRUM SOON, replace the drum unit with a new one.
General| Brand | Brother |
|---|---|
| Model | MFC-9760 |
| Category | All in One Printer |
| Language | English |
To Next Page
