Brother MFC-9560CDW - User Manual

Other manuals for Brother MFC-9560CDW

Service Manual590 pages

Basic User's Guide199 pages

Network User's Guide43 pages

Quick Setup Guide38 pages

Questions and Answers

M
Misty NicholsonJul 26, 2025
Why Brother All in One Printer is not found on the network during MFL-Pro Suite installation?
- M
  Mr. William GreenJul 26, 2025
  If your Brother All in One Printer is not found on the network during the MFL-Pro Suite installation, here are a few things to try: * Make sure to choose to search for the Brother machine again on the installer dialog. * Allow access when the alert message of the security software appears during the MFL-Pro Suite installation. * Place your Brother machine within about 3.3 feet (1 meter) from the WLAN access point/router when you configure the wireless network settings. * Move your Brother machine to an obstruction-free area, or closer to the WLAN access point/router. * Move all the devices away from Brother machine or WLAN access point/router.
A
adamsdustinAug 2, 2025
What to do if Brother All in One Printer cannot print or scan over the network?
- S
  Shawn SimmonsAug 2, 2025
  If your Brother All in One Printer cannot print or scan over the network, confirm the IP address and the Subnet Mask. Verify that both the IP addresses and Subnet Masks of your computer and the Brother machine are correct and located on the same network. If the failed printing job is still in the print queue of your computer, delete it. You can also try to uninstall the MFL-Pro Suite and reinstall it.
D
Dwayne DiazAug 10, 2025
How to complete wireless network setup configuration on Brother All in One Printer?
- B
  Benjamin WilliamsAug 10, 2025
  To complete the wireless network setup configuration on your Brother All in One Printer, reconfirm and choose the correct security settings. The manufacturer's name or model no. of the WLAN access point/router may be used as the default security settings. Also, confirm the MAC address of the Brother machine is allowed in the filter. You can find the MAC address from the Brother machine's control panel. You should type the correct SSID name or Network Key by hand. Check the SSID name or the Network Key in the instructions supplied with your WLAN access point/router and reconfigure the wireless network setup. Use the Network Connection Repair Tool.
S
Stephanie MillerAug 17, 2025
How do I check my network devices are working properly with Brother All in One Printer?
- G
  Grace StanleyAug 18, 2025
  To check if your network devices are working properly with your Brother All in One Printer, make sure you have confirmed all instructions in First check the following. Print the Network Configuration List. Print the Network Configuration List and check that Ethernet Link Status or Wireless Link Status is Link OK. Ping the Brother machine from your computer using the IP address or the node name. Print the WLAN report to confirm the state of the wireless connection.

Brother MFC-9560CDW Specifications

General

Type	all in one
Color	black
Touch Screen	no
Display Size	0 inches
Tray Capacity	300
Automatic Document Feeder Capacity	25 sheets
Paper Size	letter, legal, executive, folio, a4, a5, b6
Paper Handling	up to 300 sheets
Printing Method	color
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Two-Sided Printing	no
Maximum Number of Pages Per Month	up to 40, 000
Reduction and Enlargement	yes
Photo Printing	no
Scanner Type	flatbed
Scan Resolution	up to 2400 x 1200
Max Copies	99
Copier Resolution Mono	up to 2400 x 600
Copier Resolution Color	up to 2400 x 600
Cartridges	n/a
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	no