How to fix dark or light printouts on Brother MFC-9760 All in One Printer?
To fix printouts that are too dark or light on your Brother All in One Printer, adjust the print conditions by setting the Print Density function. The Print Density function has been factory set to the middle position.
Why does my Brother MFC-9760 All in One Printer say 'Change Drum Soon'?
The 'Change Drum Soon' message on your Brother All in One Printer appears because: - The drum unit is near the end of its life. If you have a print quality problem, replace the drum unit with a new one. - The drum counter was not reset after a new drum was fitted. Open the front cover and press Clear Settings, then press 1 to reset.
Why does my Brother MFC-9760 say 'Change Toner'?
The 'Change Toner' message on your Brother All in One Printer indicates that the toner is depleted and will soon run out. It's recommended to order a new toner cartridge.
General| Brand | Brother |
|---|---|
| Model | MFC-9760 |
| Category | All in One Printer |
| Language | English |
To Next Page
