Troubleshooting and Maintenance 63
MAINTENANCE
OUT OF MEMORY
(When the machine is
used as a printer.)
The machine memory capacity has
been exceeded.
- If you have installed the
Windows
®
driver, try again
after setting the True Type
mode to “Print as Graphics” in
the PRINT menu of your
application software.
- Reduce the print resolution or
reduce the complexity of your
document.
OUT OF MEMORY
(When the machine is
used as a copier.)
The machine memory capacity has
been exceeded.
See Out of Memory Message, page
13.
PAPER JAM The recording paper is jammed in the
machine.
See Printer Jam or Paper Jam,
page 64.
PLS CLOSE COVER Top cover is not closed completely. Open the top cover, then close it.
PLS OPEN COVER A page, piece of paper or paper clip,
etc. may be jammed inside the
machine.
Open the top cover and remove the
drum unit. If you see any jammed
paper or other item, gently pull it
out. Reinstall the drum unit, then
close the top cover. If the error
message remains, open and close
the top cover again. If the machine
cannot reset itself and return to the
date and time prompt, it will
display MACHINE ERROR XX.
Then contact your Brother dealer
for service.
TONER EMPTY Toner is used up and printing is not
possible, or toner cartridge is not
installed into the drum unit.
Replace the toner cartridge with a
new one, or install the toner
cartridge into the drum unit. (See
Replacing the Toner Cartridge,
page 74.)
ERROR MESSAGE CAUSE ACTION
To Next Page
Loading...
