Brother MFC-9180 Quick Setup Guide

( For Windows
®
2000 Professional User )
For Parallel interface cable users
Step 4.
Connect the MFC to your PC with Parallel Cable.
A. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips.
B. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your
computer’s parallel printer port, see the User’s Guide for your computer.
Step 5.
Turn the MFC power switch ON.
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
1. In the Connect Cable window,
click Next.
( For Windows
®
95/98/98SE/Me Users )
2. When the above screen
appears, click Finish and
wait
as the PC restarts Windows
®
and continues the installation.
3. Click Yes to have the Control
Centre loaded each time
Windows
®
is started. The
Control Centre will appear as
an icon in the task tray. If you
click No the Scan keys on the
MFC will be disabled. Please
see Note*3.
1. In the Connect Cable window,
click Next.
2. When the above screen
appears, Click Finish and
wait
as the PC restarts Windows
®
and continues the installation.
3. When the Digital Signature
Not Found dialog boxes
appear, click Yes to install the
driver.
4. Click Yes to have the Control
Centre loaded each time
Windows
®
is started. The Control
Centre will appear as an icon in
the task tray. If you click No the
Scan keys on the MFC will be
disabled. Please see Note*3.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
( For Windows
®
2000 Users )
For USB interface cable users
Step 4.
Turn the MFC power switch ON.
Step 5.
Connect the Filter Core and Cable Tie to the USB cable,
and then connect the MFC to your PC with the USB cable.
(It will take a few seconds for the installation screen to appear.)
Step 6.
The installation of the Brother driver will automatically start.
Follow the instructions on the screen.
1. In the Add Printer Wizard
window, select BRUSB:
USB Printer Port, and then
click Next.
( For Windows
®
98/98SE/Me Users )
2. Accept the default Printer
name by selecting Yes, and
then click Next.
4. If the test page is printed
correctly, click Yes.
If you click No, follow the
prompts on the screen to
correct the problem.
1. When the Digital Signature Not
Found dialog boxes appear, click
Yes to install the driver.
3. Select Yes (recommended),
and then click Finish. A test
page will be printed so you
can check the print quality.
5. Select Yes to restart your
computer, and then click
Finish.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
2. Select Finish to restart your
computer.
The Brother PC fax, Printer and Scanner drivers have
been installed and the installation is now complete.
6. Click Yes to have the Control
Centre loaded each time
Windows
®
is started. The
Control Centre will appear as
an icon in the task tray. If you
click No the Scan keys on
the MFC will be disabled.
Please see Note*3.
3. Click Yes to have the Control
Centre loaded each time
Windows
®
is started. The Control
Centre will appear as an icon in
the task tray. If you click No the
Scan keys on the MFC will be
disabled. Please see Note*3.
– 3 –

Brother MFC-9180 Specifications

General Copier Specifications

engine laser speed	10 copies per minute
modem speed	14, 400 bps
resolution	600 x 300 dpi

Scanner Specifications

optical resolution	600 x 2, 400 dpi
interpolated resolution	9, 600 x 9, 600 dpi
CPU speed	100MHz

Memory and Capacity

total memory capacity	8 MB
memory back-up	4 days
ADF capacity	30 sheets

Printer Specifications

print speed	10 pages per minute
resolution	600 x 600 dpi
paper capacity	200 sheets

Fax Weights and Measures

dimensions	459mm width x 458mm depth x 354mm height
weight	11 Kg
power consumption (sleep)	15 w or less