Brother MFC-9460CDN Quick Setup Guide

3
2
Remove the packing
material from the
machine
a Remove the packing tape from the outside of
the machine.
b Open the MP tray a, and remove the plastic
sheet b from the MP tray support, then close
the MP tray.
c Press the front cover release button and open
the front cover. Remove the silica gel pack a.
CAUTION
CAUTION
DO NOT eat Silica Pack. Discard immediately.
d Hold the green handle of the drum unit a and
pull it out until it stops.
e Gently pull the orange packing material
towards the front of the machine to remove it.
f Remove the 4 orange packing pieces.
g Push the drum unit firmly back into the
machine.
h Close the front cover of the machine.
IMPORTANT
DO NOT connect the AC power cord yet.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds