What to do if my Brother Printer says 'No Toner'?
If your Brother Printer displays 'No Toner', it means the toner cartridge for the color indicated on the LCD screen isn't installed correctly. To fix this, pull out the drum unit, remove the indicated toner cartridge, and then reinsert it back into the drum unit.
How to fix 'Drum Error' on my Brother Printer?
If your Brother Printer shows a 'Drum Error', it indicates that the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit to resolve this issue.
How to fix 'Replace Parts Drum' message on Brother Printer?
If your Brother Printer is displaying 'Replace Parts Drum', it indicates that it is time to replace the drum unit. Replace the drum unit to resolve this issue.
What to do if my Brother Printer says 'Cover is Open'?
If you see 'Cover is Open' on your Brother Printer, it means the front cover, ADF cover, or fuser cover isn't completely closed, or paper was jammed when you turned it on. Make sure to close the front cover, ADF cover, and fuser cover properly. If there was a paper jam, remove the jammed paper, close the fuser cover, and then press Mono Start or Colour Start.
What to do if my Brother Printer shows 'Toner Error'?
If your Brother Printer displays 'Toner Error', it signifies that one or more toner cartridges are not installed correctly. To resolve this, pull out the drum unit, remove all the toner cartridges, and then reinsert them back into the drum unit.
How to fix 'Replace Parts Belt Unit' message on Brother Printer?
If your Brother Printer displays 'Replace Parts Belt Unit', it means it is time to replace the belt unit. Replace the belt unit to resolve this issue.
How to fix 'Drum Stop' message on Brother Printer?
If your Brother Printer shows 'Drum Stop', it means it is time to replace the drum unit. Replace the drum unit.
What to do if my Brother Printer says 'No Belt Unit'?
If your Brother Printer is displaying 'No Belt Unit', it means that the belt unit is not installed correctly. Re-install the belt unit to resolve this.
How to fix 'Fuser Error' on my Brother Printer?
If your Brother Printer displays 'Fuser Error', it means the fuser unit's temperature isn't rising to the specified level within the needed time. Turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
Why does my Brother Printer say 'Cooling Down Wait for a while'?
If your Brother Printer shows 'Cooling Down Wait for a while', the drum unit or toner cartridge is too hot. Ensure the fan is spinning and the exhaust outlet isn't blocked. If the fan works, clear any obstructions around the exhaust and let the machine sit for several minutes. If the fan doesn’t spin, disconnect the power for several minutes, then reconnect it.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Duplex printing mode | Auto |
| Time to first page (color, normal) | 16 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 7 ppm |
| Digital sender | No |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Maximum duty cycle | - pages per month |
| Page description languages | PCL 6, PostScript 3 |
| Scan to | E-mail, File, FTP, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Maximum scan area | 216 x 356 mm |
| Output color depth | 24 bit |
| Scan speed (black) | 1.99 ppm |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 1200 x 2400 DPI |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 19 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Faxing | Color faxing |
| Fax memory | 500 pages |
| Modem speed | 33.6 Kbit/s |
| Fax coding methods | JBIG, MH, MMR (Fax coding method), MR |
| Fax transmission speed | 2.5 sec/page |
| Fax speed dialing (max numbers) | 300 |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Multi-Purpose tray input capacity | 50 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Display | LCD |
| Product color | Black, Ivory |
| Display diagonal | 2.76 \ |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Display number of characters | 16 |
| Internal memory | 256 MB |
| Processor family | Star Sapphire |
| Maximum internal memory | 512 MB |
| Sound power level (standby) | 33 dB |
| Sound pressure level (printing) | 57 dB |
| Paper tray media types | Bond paper, Glossy paper, Labels, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Legal |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Mobile printing technologies | - |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | 1 |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 70 W |
| Power consumption (PowerSave) | 1.7 W |
| Power consumption (average operating) | 570 W |
| Dimensions (WxDxH) | 410 x 503 x 492 mm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | copy, fax, print, scan |
| Package weight | 32000 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 503 mm |
|---|---|
| Width | 410 mm |
| Height | 492 mm |
To Next Page
