Brother MFC-9560CDW Network User's Guide

Changing your machine’s network settings
5
2
c Double-click the unconfigured device.
Note
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration
List. (See Printing the Network Configuration List on page 36 for information on how to print the Network
Configuration List on your print server.) You can also find the Node Name and MAC Address from the
control panel. (See Chapter 5: Control panel setup.)
d Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and
Gateway (if needed) of your print server.
e Click OK.
f With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows
®
Macintosh
Windows
®
Macintosh

Brother MFC-9560CDW Specifications

General

Type	all in one
Color	black
Touch Screen	no
Display Size	0 inches
Tray Capacity	300
Automatic Document Feeder Capacity	25 sheets
Paper Size	letter, legal, executive, folio, a4, a5, b6
Paper Handling	up to 300 sheets
Printing Method	color
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Two-Sided Printing	no
Maximum Number of Pages Per Month	up to 40, 000
Reduction and Enlargement	yes
Photo Printing	no
Scanner Type	flatbed
Scan Resolution	up to 2400 x 1200
Max Copies	99
Copier Resolution Mono	up to 2400 x 600
Copier Resolution Color	up to 2400 x 600
Cartridges	n/a
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired, wireless
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	no

Weight and Dimensions

Height	16.1 inches
Width	19.8 inches
Net Weight	58.4 pounds