Brother MFC-J1205W - Enable;Disable Wireless LAN

Home > Network > Wireless Network Settings > Enable/Disable Wireless LAN
Enable/Disable Wireless LAN
1. Press (Wi-Fi) and (STOP) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Wi-Fi LED starts
blinking.
2. Press MONO COPY to enable Wi-Fi.
• When Wi-Fi is enabled, the Power LED blinks once, and then the Power LED and Wi-Fi LED are lit.
• When Wi-Fi is disabled, the Power LED blinks twice, and then the Power LED is lit.
Related Information
• Wireless Network Settings
119