Brother MFC-J1300DW - Send a Fax from Your Brother Machine

Home > Fax > Send a Fax > Send a Fax from Your Brother Machine
Send a Fax from Your Brother Machine
Related Models: MFC-J1300DW
1. Load your document in the ADF or place it on the scanner glass.
2. Press [Fax].
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
The touchscreen displays:
3. Enter the fax number in one of the following ways:
• Dial Pad (Enter the fax number manually.)
Press all digits of the number using the touchscreen.
• Call History
Press [Call History].
Press [Redial], [Outgoing Call] or [Caller ID History].
If you select [Outgoing Call] or [Caller ID History], select the number you want, and then
press [Apply].
(Caller ID feature is not available for Taiwan and some countries)
• Address Book
Press [Address Book].
Do one of the following:
- Select the number you want, and then press [Apply].
- Press
, and then enter the first letter of the name and press [OK]. Press the name you want to
dial. If the name has two numbers, press the number you want. Press [Apply].
(available only for some countries)
If the LDAP search is available, the result will be shown on the touchscreen with .
4. To change the fax settings, press [Options].
When finished, press [OK].
5. Press [Fax Start].
• If you are using the ADF, the machine starts scanning and sending the document.
200