Home > Troubleshooting > Error and Maintenance Messages > Error Messages When Using the Brother
Web Connect Feature
Error Messages When Using the Brother Web Connect Feature
Your Brother machine displays an error message if an error occurs. The most common error messages are
shown in the following chart.
You can correct most errors yourself. If you need more tips, go to your model's FAQs & Troubleshooting page
on the Brother Solutions Center at support.brother.com.
Connection Error
Error Messages
Cause Action
Connection Error 02
Network is not connected.
Check that the machine is
connected to the network.
The machine is not connected to a
network.
• Verify that the network connection
is good.
• If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
Connection Error 03
Connection failed to server.
Check network settings.
• Network or server settings are
incorrect.
• There is a problem with the
network or server.
• Confirm that network settings are
correct, or wait and try again later.
• If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
Connection Error 07
Connection failed to server.
Set the correct Date&Time.
Date and time settings are incorrect. Set the date and time correctly. Note
that if the machine's power cord is
disconnected, the date and time
settings may have reset to factory
settings.
Authentication Error
Error Messages
Cause Action
Authentication Error 01
Incorrect PIN code. Enter
PIN correctly.
The PIN you entered to access the
account is incorrect. The PIN is the
four-digit number that was entered
when registering the account to the
machine.
Enter the correct PIN.
Authentication Error 02
Incorrect or expired ID, or
this temporary ID is already
used. Enter correctly or
reissue temporary ID.
Temporary ID is valid for 24
hours after it is issued.
The temporary ID that was entered is
incorrect.
Enter the correct temporary ID.
The temporary ID that was entered
has expired. A temporary ID is valid
for 24 hours.
Apply for Brother Web Connect
access again and receive a new
temporary ID, and then use the new
ID to register the account to the
machine.
Authentication Error 03
Display name has already
been registered. Enter
another display name.
The name you entered as the display
name has already been registered to
another service user.
Enter a different display name.
494
To Next Page
Loading...
Need help?
General
Weight and Dimensions
