Brother MFC-J1300DW - Set the Fax Receive Stamp

Home > Fax > Receive a Fax > Set the Fax Receive Stamp
Set the Fax Receive Stamp
Related Models: MFC-J1300DW
Set the machine to print the date and time of receipt at the top of each incoming fax page. Make sure you have
set the current date and time on the machine.
This feature is available only for monochrome faxes.
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Fax Rx Stamp].
2. Press [On] (or [Off]).
3. Press .
Related Information
• Receive a Fax
225