Chapter 2
12
h Slowly and firmly push the paper tray
completely into the machine.
i While holding the paper tray in place,
pull out the paper support (1) until it
locks into place, and then unfold the
paper support flap (2).
Loading envelopes 2
About envelopes 2
Use envelopes that weigh between 80 to
95 g/m
2
.
Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing multiple
envelopes.
DO NOT use the following types of
envelopes, as they will not feed correctly:
• That are of a baggy construction.
• That have windows.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
Glue Double flaps
To Next Page
Loading...
