Brother MFC-J200 - 5 Receiving a Fax; Receive Modes; Choose the Receive Mode

25
5
5
Receive Modes 5
You must choose a Receive Mode depending on the external devices and telephone services you
have on your line.
Choose the Receive Mode 5
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct receive mode.
For more detailed information on the Receive Modes, see Using Receive Modes on page 26.
To set the Receive Mode follow the instructions:
a Press (FAX).
b Press Menu, 3, 1, 1.
c Press a or b to choose Fax Only, Fax/Tel, External TAD or Manual.
Press OK.
d Press Stop/Exit.
Receiving a fax 5
Do you want to use the telephone features of your machine (if available), an external
telephone or external telephone answering device connected on the same line as the
machine?
Yes
Fax Only
No
No
No
Manual
Yes
External TAD
Fax/Tel
Are you using the voice message function of
an external telephone answering device?
Do you want the machine to answer fax and
telephone calls automatically?
Yes