Chapter 1
8
LCD screen 1
The LCD shows the current machine status
when the machine is idle.
1 Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Current Receive Mode
Lets you see the current receive mode.
Fax (Fax only)
F/T (Fax/Tel)
TAD (External TAD)
Mnl (Manual)
3 Memory Status
Lets you see the available memory in the
machine.
4 Ink indicator
Lets you see the available ink volume.
The warning icon appears when there is
an error or a maintenance message. For
details, see Error and Maintenance
messages on page 54.
Basic Operations 1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Mode Timer.
Press OK.
d Press a or b to choose 30Secs.
Press OK.
You can see the current setting on the
LCD:
e Press Stop/Exit.
0Max
Fax Mem.
01:41:4101:41
01. 01. 201001. 01. 201001. 01. 2010
1
2 3 4
Fax
General Setup
MENU Sel.&Press
Ink
OK
General Setup
Mode Timer
Paper Type
Paper Size
2Mins
Mode Timer
30secs
1Min
Off
0Sec
Mode Timer
Paper Type
Paper Size
30Secs
General Setup
To Next Page
Loading...
Need help?
General
