Brother MFC-J270w Basic User's Guide

22
4
How to send a fax 4
The following steps show how to send a fax.
a When the machine is idle, the time
appears on the LCD. When you want to
send a fax, or change fax send or
receive settings, press the (FAX)
key to illuminate it in blue.
 The LCD shows:
b Do one of the following to load your
document:
 Place the document face down in the
ADF. (See Using the ADF
(MFC-J415W only) on page 20.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 20.)
Note
• If you send a black & white fax from the
ADF while the memory is full it will be sent
in real time.
• You can use the scanner glass to fax
pages of a book one at a time. The
document can be up to Letter or A4 size.
• To send color faxes with multiple pages
use the ADF. (MFC-J415W only)
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
(MFC-J415W only)
c Set the scanner glass size, fax
resolution or contrast if you want to
change them.
For more advanced fax sending
operations and settings, For more
advanced fax sending operations and
settings, see Sending a Fax in chapter 3
in the Advanced User’s Guide:
 Broadcasting
 Real Time TX
 Overseas Mode
 Fax Resolution
 Contrast
 Glass ScanSize
d Enter the fax number.
Using the dial pad
Using the Phone Book
 Speed Dial
Using call history
 Outgoing Call
 Caller ID hist.
Sending a fax 4
Fax Resolution
Contrast
Standard
Press Start
Enter Number

Brother MFC-J270w Specifications

General

Brand	Brother
Model	MFC-J270w
Category	All in One Printer
Language	English