Brother MFC-J270w Basic User's Guide

80
Network menu
Level1 Level2 Level3 Options Descriptions
Network TCP/IP BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits your
needs.
IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
Node Name BRWXXXXXXXXXXXX Enter the Node name.
WINS Config Auto*
Static
Chooses the WINS
configuration mode.
WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
server.
APIPA On*
Off
Automatically allocates the
IP address from the link-
local address range.
Setup Wizar d — — You can manually
configure your print server
for a wireless network.
WPS/AOSS — — You can easily configure
your wireless network
settings using the one-
button push method.
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.

Brother MFC-J270w Specifications

General

Brand	Brother
Model	MFC-J270w
Category	All in One Printer
Language	English