Brother MFC-J2730DW - Page 684

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
How Long the LCD Backlight Stays On
Change How Long the LCD Backlight Stays On
You can set how long the LCD backlight stays on after the last finger press.
>> MFC-J2330DW
>> MFC-J2730DW
MFC-J2330DW
1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim
Timer].
2. Press a or b to display the [10Secs], [30Secs], [1Min], [2Mins], [3Mins], or [5Mins] option, and
then press the option you want.
3. Press .
MFC-J2730DW
1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim
Timer].
2. Swipe up or down or press a or b to display the [10Secs], [30Secs], [1Min], [2Mins], [3Mins], or
[5Mins] option, and then press the option you want.
3. Press .
Related Information
• General Settings
677