Changing your machine’s network settings
7
2
• You can find the Node Name and MAC Address / Ethernet Address by printing the Network Configuration
Report. (See Printing the Network Configuration Report on page 32.) You can also find the Node Name
and MAC Address from the control panel on your machine. (See Control panel setup on page 24.)
d Choose STATIC for the Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed)
of your print server.
e Click OK.
f With the correctly programmed IP address, you will see the Brother print server in the device list.
Windows
®
Macintosh
To Next Page
Loading...
