Brother MFC-J4410DW - Mail Address

Control panel setup
28
4
You can also access the character you want by repeatedly pressing the appropriate number key using the
machine’s control panel. (For entering text, see the Quick Setup Guide.)
Mail Address 4
You can set your machine’s E-mail address.
Setup Server 4
SMTP Server 4
This field displays the node name or IP address of an SMTP mail server (outgoing E-mail server) on your
network.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
SMTP Port
4
This field displays the SMTP port number (for outgoing E-mails) on your network.
Auth. for SMTP 4
You can specify the security method for E-mail notification. (For details on the security methods for E-mail
notification, see Sending an E-mail securely on page 63.)
POP3 Server 4
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
POP3 Port
4
This field displays the POP3 port number (for incoming E-mails) used by the Brother machine.
Mailbox Name
4
You can specify a mailbox name on the POP3 server where the Internet print jobs are to be retrieved.
Mailbox Pwd 4
You can specify the password for the POP3 server account where the Internet print jobs are to be retrieved.
NOTE
To set no password, enter a single space.
APOP 4
You can enable or disable the APOP (Authenticated Post Office Protocol).