Brother MFC-J4410DW - Set the Date and Time

7
9
Set the date and time
a Press Settings.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press Date & Time.
d Press Date & Time.
Enter the last two digits of the year on the
Touchscreen, and then press OK.
To move the cursor to the left, press and
re-enter the number.
e Repeat for month/day/time in 24-hour format.
f Press .
10
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a Press Settings.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Station ID.
Press Station ID.
d Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
f Press .
11
Set Tone or Pulse dialling
mode
a Press Settings.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Tone/Pulse.
Press Tone/Pulse.
d Press Pulse (or Tone).
e Press .
12
Set the telephone line
type
a Press Settings.
b Press s or t to display Initial Setup.
Press Initial Setup.
c Press s or t to display Phone Line Set.
Press Phone Line Set.
d Press s or t to display Normal, PBX or ISDN.
Press the desired telephone line type.
e Press .
NOTE
If you make a mistake and want to start again,
press and go back to a.
NOTE
If you choose PBX the machine will then ask you
to set the Dial Prefix. uuBasic User’s Guide:
Setting the Telephone Line Type