Sending a fax (MFC models)
13
3
Real Time Transmission 3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can do this by turning on
Real Time TX.
a Load your document.
b Press (FAX).
c Press a or b to choose
Advanced Settings.
Press OK.
d Press a or b to choose Real Time TX.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Clear so you can continue
sending your fax.
g Enter the fax number.
h Press Black Start or Color Start.
• If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will turn itself
off.
a Load your document.
b Press (FAX).
c Press a or b to choose
Advanced Settings.
Press OK.
d Press a or b to choose
Overseas Mode.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Clear so you can continue
sending your fax.
g Enter the fax number.
h Press Black Start or Color Start.
To Next Page
Loading...
Need help?
General
