Making copies
31
7
Making N in 1 copies or a
poster (Page Layout) 7
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
• Sort, Enlarge/Reduce and
Remove Background are not available
with Page Layout.
• 2-sided Copy
1
is not available with
Poster copy.
1
MFC models only
a Load your document.
b (MFC models)
Press (COPY).
c Enter the number of copies you want.
1
1
You can only make one copy at a time when
you are using Poster layout.
d Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose Off(1in1),
2in1(P), 2in1(L), 4in1(P),
4in1(L), Poster (2x1),
Poster (2x2), Poster (3x3) or
2in1(ID)
1
.
Press OK.
1
For information about 2 in 1 (ID), see 2 in 1 ID
copy (Page Layout) on page 33.
f If you do not want to change additional
settings, press Black Start or
Color Start to scan the page.
If you placed the document in the ADF
1
or are making a poster, the machine
scans the pages and starts printing.
1
MFC models only
If you are using the scanner glass, go
to step g.
g After the machine has scanned the
page, press 1 or + to scan the next page.
h Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps g and h for each page of
the layout.
i After all the pages have been scanned,
press 2 or - to finish.
• Make sure the paper size is set to Letter,
A4 or Executive.
• Poster copy is not available for Executive
size paper.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• Poster copy is not available when using
transparencies.
• (P) means Portrait and (L) means
Landscape.
To Next Page
Loading...
Need help?
General
