Brother MFC-J4510DW - 2 Configuration Methods; Step by Step Chart for Wi-Fi Direct Network Configuration

3
2
2
Step by step chart for Wi-Fi Direct network configuration 2
The following instructions offer five methods for configuring your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
1
If you cannot connect successfully when using Android™ 4.0, see One-push configuration using Wi-Fi Direct.
 One-push configuration using Wi-Fi Direct
For MFC-J2510/J4510DW, see One-push configuration using Wi-Fi Direct on page 5.
 One-push configuration using WPS (Wi-Fi Protected Setup)
For MFC-J2510/J4510DW, see One-push configuration using WPS (Wi-Fi Protected Setup) on page 6.
 PIN Method configuration using Wi-Fi Direct
For MFC-J2510/J4510DW, see Configuration using the PIN Method of Wi-Fi Direct on page 6.
 PIN Method configuration using WPS (Wi-Fi Protected Setup)
For MFC-J2510/J4510DW, see Configuration using the PIN Method of WPS (Wi-Fi Protected Setup)
on page 7.
 Manual wireless configuration
For MFC-J2510/J4510DW, see Manual configuration for a Wi-Fi Direct network on page 8.
Configuration methods 2
Check your mobile device for configuration.
Does your mobile device support Wi-Fi Direct?
Yes No
Does your mobile device support one-push
configuration for Wi-Fi Direct?
Does your mobile device support WPS (Wi-Fi Protected
Setup) ?
Yes No
Yes
No
See One-push
configuration using
Wi-Fi Direct.
See PIN Method
configuration using Wi-Fi
Direct.
1
See Manual wireless
configuration.
Does your mobile device support one-push
configuration for WPS (Wi-Fi Protected Setup) ?
Yes No
See One-push
configuration using WPS
(Wi-Fi Protected Setup).
See PIN Method
configuration using WPS
(Wi-Fi Protected Setup).