Brother MFC-J4625DW - Reset Operations

66
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the Touchscreen.
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to
display Machine Info.
d Press Machine Info.
e Press Serial No.
Your machine’s serial number will
appear on the Touchscreen.
f Press .
Checking the firmware
version B
You can see the machine’s firmware version
on the Touchscreen.
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to
display Machine Info.
d Press Machine Info.
e Press Firmware Version.
f Press Main Version.
Your machine’s firmware version will
appear on the Touchscreen.
g Press .
Reset operations overview B
The following reset operations are available:
1 Machine Reset
You can reset all the machine’s settings
that you have changed, such as the date
and time, telephone line type and Ring
Delay.
2 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
3 Address Book & Fax
Address Book & Fax resets the following
settings:
 Address Book
(Address Book and Setup Groups)
 Programmed fax jobs in the memory
(Polled Transmit, Delayed Fax and
Delayed Batch Transmission)
 Station ID
(Name and Number)
 Remote Fax Options
(Fax Forwarding)
 Report settings
(Transmission Verification Report,
Address Book and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
4 All Settings
You can restore all settings to the factory
default.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.