Brother MFC-J470DW - Changing the Fax Resolution

Sending a fax (MFC models)
7
3
NOTE
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in either of the following conditions:
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
Changing the fax resolution 3
The quality of a fax can be improved by
changing the fax resolution.
a Load your document.
b Press (FAX).
c Press a or b to choose
Fax Resolution.
Press OK.
d Press a or b to choose the resolution
you want.
Press OK.
e Enter the fax number.
f Press Mono Start or Colour Start.
NOTE
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than
Fine resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.