Brother MFC-J470DW - Sleep Mode; Auto Power off (DCP Model)

Chapter 1
2
Sleep Mode 1
You can choose how long the machine will
remain idle before it goes into Sleep Mode
(up to 60 minutes). The timer will restart if any
operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode.
Press OK.
d Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins which is the length of time the
machine is idle before entering Sleep
Mode.
Press OK.
e Press Stop/Exit.
Auto Power Off
(DCP model)
1
The Auto Power Off feature will turn off the
machine after it has been in Sleep Mode for
the number of hours you set. When this
feature is Off, the machine will remain in
Sleep Mode and not turn itself off.
The default setting is 1h.
NOTE
The machine will not power off
automatically when:
• the machine is connected to a wireless
network
• WLAN Enable is set to On.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Auto Power Off.
Press OK.
d Press a or b to choose 1h, 2h, 4h, 8h or
Off.
Press OK.
e Press Stop/Exit.