Loading paper
23
2
Check Paper setting 2
If the Check Paper setting is set to On, the
machine displays a message asking if you
want to change the paper type and paper size
setting. This message will appear each time
you pull a tray out of the machine or load
paper in the MP Tray. The default setting is
On.
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down or press a or b to
display Tray Setting.
f Press Tray Setting.
g Swipe up or down or press a or b to
display Check Paper.
h Press Check Paper.
i Press Off (or On).
j Press .
Recommended print media 2
To get the best print quality, we recommend
using the following paper:
Handling and using print
media 2
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped
1 0.08 in. (2 mm) or greater curl may
cause jams to occur.
• Extremely shiny or highly textured
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a short grain
Brother paper
Paper Type Item
Premium Plus Glossy
Photo
Ledger BP71GLGR
Letter BP71GLTR
4" 6" BP71GP20
Plain Inkjet
Ledger BP60PLGR (USA only)
1
1
To Next Page
Loading...
