Brother MFC-J5620DW - Checking Print Quality

Chapter 10
40
To set the Receive Mode, follow the instructions:
a Press (Settings).
b Press All Settings.
c Swipe up or down or press a or b to display Fax.
d Press Fax.
e Swipe up or down or press a or b to display Setup Receive.
f Press Setup Receive.
g Swipe up or down or press a or b to display Receive Mode.
h Press Receive Mode.
NOTE
If you cannot change the Receive Mode, make sure the Distinctive Ring feature is set to Off.
(See Online User’s Guide: Register the Distinctive Ring Pattern.)
i Press Fax Only, Fax/Tel, External TAD or Manual.
j Press .
Receive Modes overview 10
Some Receive Modes answer automatically (Fax Only and Fax/Tel). You may want to change
the Ring Delay before using these modes. (See Ring Delay on page 42.)
Fax Only 10
Fax Only mode will automatically answer every call as a fax call.
Fax/Tel 10
Fax/Tel mode recognizes and manages incoming fax and voice calls:
 Faxes will be received automatically.
 Voice calls will start the F/T Ring to alert you to answer the call. The F/T Ring is a fast
pseudo/double-ring made by your machine.
(See F/T Ring Time (Fax/Tel mode only) on page 42.)
(See Ring Delay on page 42.)