11
Windows
®
USB
Windows
®
Macintosh
USB
c Choose Local Connection, and then click
Next. The installation continues.
d When this screen appears, go to the next step.
16
Connect the USB cable
a Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b Connect the USB cable to the USB socket
marked with a symbol. You will find the
USB socket inside the machine on the right as
shown below.
c Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your computer.
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
LAN USB
To Next Page
Loading...
Need help?
General
