Chapter 2
26
Loading envelopes 2
a Before loading, press the corners and
sides of the envelopes to make them as
flat as possible.
If envelopes are “double-feeding,” put one
envelope in the paper tray at a time.
b Gently press and slide the paper side
guides to fit the paper size.
c Put envelopes in the paper tray #1 with
the address side down. If the envelope
flaps are on the long edge, load the
envelopes with the flap on the left, as
shown in the illustration.
Gently adjust the paper side guides (1)
to fit the size of the envelopes.
To Next Page
Loading...
