Confidential
2-76
â– Traces of paper pull-in roller
â– Dirt on the paper
< User Check >
- Check whether the recording paper being used is within
the specification.
- Clean the paper pull-in roller.
- Clean the MP paper pull-in roller.
Step Cause Solution
1 Paper pull-in roller defective Replace the T1 Paper pull-in roller L/R, paper
feed arm frame ASSY, T2 Paper pull-in roller L/R,
LT frame ASSY or T3 Paper pull-in roller L/R.
2 MP paper pull-in roller
defective
Replace the MP tray ASSY.
< User Check >
- Check whether the recording paper being used is not folded.
- Check whether the recording paper being used is within the specification.
- Clean the related rollers by printing blank paper.
-
Clean the platen.
Step Cause Solution
1 Maintenance unit stained Clean the maintenance unit.
(refer to Fig. 2-11 (2-68))
2 Paper feed roller stained Replace the paper feed roller.
3 Paper ejection roller stained Replace the paper ejection roller.
4 Switchback roller stained Replace the switchback roller.
5 Intermediate roller stained Replace the intermediate roller.
6 Foreign materials in the
reverse side of the head
Remove foreign materials.