EasyManuals Logo

Brother MFC-J6545DW User Manual

Brother MFC-J6545DW
402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #322 background imageLoading...
Page #322 background image
5-18
Confidential
1.3.8 Updating of Firmware Using a USB flash memory (Maintenance mode 28)
< Function >
This function updates firmware stored in the flash ROM on the main PCB using a USB
flash memory. It enables updating of firmware without connecting the machine to a PC.
TIP: For instructions on how to update firmware when the main PCB has been
replaced or for operations using a PC, refer to Chapter 4, Section 1.3 "Install the
firmware (Maintenance mode 28)."
< Operating Procedure >
(1) Switch your PC ON and insert a USB flash memory.
(2) Create a folder named "BROTHER" in the top layer of the USB flash memory's
directory and copy the firmware file having the extension ".djf" into that folder.
Note: Before copying, check that the firmware file name having the extension ".djf"
matches your machine. The number of files having the extension ".djf" in the
"BROTHER" folder should be 100 or less.
Tip: If a firmware file not matching the machine is used, the firmware cannot be 
updated, but note that you can superficially continue the operation until step
(5) below without any error.
(3) Remove the USB flash memory from the PC and insert it into the machine in the
initial stage of the maintenance mode.
(4) On the machine, press the 2 and 8 keys in this order.
The file name "********.djf" appears on the LCD.
(5) Press the
â–² or â–¼ key to select the target firmware file.
(6) Press the Mono Start key.
"Program Updating" appears on the LCD.
Note: Never remove the USB flash memory from the machine when updating is in
progress.
(7) Updating will complete in a few minutes, and the machine automatically restarts
and returns to the standby state.
Remove the USB flash memory from the machine and store it in a safe place.
Note: If any of the error messages listed below appears, press the X key, and the
machine returns to the initial stage of the maintenance mode.
Error Message Cause
Card is used
The USB flash memory is being used by another
operation.
Insert Card
No USB flash memory is inserted.
No file
No file with the djf extension. / No "BROTHER" folder
exists.
Card Error
USB flash memory defective

Table of Contents

Other manuals for Brother MFC-J6545DW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J6545DW and is the answer not in the manual?

Brother MFC-J6545DW Specifications

General IconGeneral
Typeall in one, fax
Colorwhite/gray, white
Touch Screenyes
Display Size3.7 inches
Tray Capacity350
Output Tray Capacity100
Automatic Document Feeder Capacity50 sheets
Printing Methodcolor
Color Print Speed20 pages per minute
Mono Print Speed22 pages per minute
First Page Print Time6 seconds
Print Resolution Monoup to 4800 x 1200
Print Resolution Colorup to 4800 x 1200
Media Typesletter-size glossy inkjet paper; 4" x 6" glossy photo paper; letter-size multi-purpose paper
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 30, 000
Reduction and Enlargementyes
Photo Printingyes
Scanner Typeflatbed
Scan Resolutionup to 2400 x 1200
Duplex Scanno
Max Copies999
Copier Resolution Monoup to 4800 x 1200
Copier Resolution Colorup to 4800 x 1200
Fax Functionyes
Cartridgeslc3037bk, lc3037c, lc3037m, lc3037y, lc3039bk, lc3039c, lc3039m, lc3039y
Number Of Cartridges4
Number of Ink Tanks0
Internal Memoryyes
Memory Cardno
Networkwired, wireless
Connectivityapple airprint, brother iprint&scan, ethernet, google cloud print, mopria print service, usb 2.0, wi-fi, wi-fi direct
Mobile Devices Connectionyes
Weight and Dimensions IconWeight and Dimensions
Depth22.6 inches
Height12.2 inches
Width22.6 inches
Net Weight44.3 pounds

Related product manuals