Brother MFC-J6910DW - Speaker Volume; LCD Display; Setting the Backlight Brightness; LCD Language

General information
9
1
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display Volume.
e Press Volume.
f Press Speaker.
g Press Low, Med, High or Off.
h Press Stop/Exit.
LCD display
1
Setting the backlight
brightness 1
If you are having difficulty reading the LCD,
try changing the brightness setting.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display LCD Settings.
e Press LCD Settings.
f Press Backlight.
g Press Light, Med or Dark.
h Press Stop/Exit.
LCD Language 1
You can change the LCD Language.
a Press MENU.
b Press a or b to display
Initial Setup.
c Press Initial Setup.
d Press a or b to display
Local Language.
e Press Local Language.
f Press English or Chinese.
g Press Stop/Exit.