Brother MFC-J6910DW - Changing One Touch or Speed Dial Names or Numbers

Chapter 7
54
Changing One Touch or
Speed Dial names or numbers7
You can change a One Touch or Speed Dial
name or number that has already been
stored.
a
Press (Phone Book).
b Press More.
c Do one of the following:
 Press Change to edit the names or
numbers.
 Press Delete to delete all
information in a Speed Dial or One
Touch location.
Press the number you want to delete.
Press OK.
Press Yes to confirm.
Go to step h.
d Press a or b to display the number you
want to change.
e Press the number you want to change.
Note
One Touch Dial locations begin with l.
Speed Dial locations begin with #.
f Do one of the following:
 If you want to change the name,
press Name:.
Enter the new name (up to
16 characters) using the buttons on
the LCD. (See Entering Text
on page 129.)
Press OK.
 If you want to change the first
Fax/Tel number, press Fax/Tel:
(One Touch Dial) or Fax/Tel1:
(Speed Dial).
Enter the new fax or telephone
number (up to 20 digits) using the
buttons on the LCD.
Press OK.
 If you want to change the second
Fax/Tel number, press Fax/Tel2:
(Speed Dial).
Enter the new fax or telephone
number (up to 20 digits) using the
buttons on the LCD.
Press OK.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press . Re-enter the character.
g Do one of the following:
 Press OK to finish.
To change another One Touch or
Speed Dial location, repeat steps b
to f.
 To change more details, go to f.
The LCD will display your settings.
h Press Stop/Exit.