36
5
Receive modes 5
By factory default, the factory setting of Receive Mode is “Fax”. Your machine will automatically
receive any faxes that are sent to it. There are four receive modes of this machine as below.
For more detailed information on the receive modes, see Using receive modes on page 37.
To set a receive mode follow the instructions below:
a Press MENU .
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press a or b to display Receive Mode.
e Press Receive Mode.
f Press Fax Only, Fax/Tel, Manual or External TAD.
g Press Stop/Exit.
The LCD will display the current receive mode.
Receiving a fax 5
Operation Display LCD Display Factory Default Ring Delay
Fax Only Fax Ring Delay: 2 times
Fax detection: On
Fax/Tel F/T Ring Delay: 2 times
Time: 30 seconds
Manual Mnl
External TAD TAD
To Next Page
Loading...
