Brother MFC-J6910DW - Setting the Fax Logic (Sending and Receiving Sequence)

Chapter 1
10
Setting the Fax Logic
(sending and receiving
sequence)
1
You can change the process of manual fax
send or receive.
If you often send or receive a fax manually
to/from the other party at the end of a
conversation, set the Fax Mode to Easy
Mode.
If you set to Easy Mode:
You can send or receive a fax manually just
simply press Start.
If yo are a caller, press Start to send a fax.
If you are a receiver, press Start to receive a
fax.
If you set to Advanced Mode:
No matter you are a caller or receiver, you
can choose you will send or receiver a fax
manually. When you press Start, the
machine will ask you:
Send/Receive?
If you want to send a fax,choose Send.
If you want to receive a fax, choose
Receive.
Note
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Start.
a Press MENU.
b Press a or b to display Fax.
c Press Fax.
d Press a or b to display
Miscellaneous.
e Press Miscellaneous.
f Press a or b to display Fax Mode.
g Press Fax Mode.
h Press Easy Mode or Advanced Mode.
i Press Stop/Exit.