Brother MFC-J6910DW - Fax Redial; Additional Dialling Operations; Outgoing Call History

Chapter 7
50
Fax Redial 7
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Color Start to try again. If you
want to make a second call to a number you
recently dialled, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a Press Redial/Pause.
b Press the number you want to redial.
c Press Send a fax.
d Press Mono Start or Color Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Additional Dialling
Operations
7
Outgoing Call history 7
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
One Touch or Speed Dial, or delete from the
history.
a Press Redial/Pause.
You can also press
(Call History).
b Press the Outgoing Call tab.
c Press the number you want.
d Do one of the following:
 To send a fax, press Send a fax.
 If you want to store the number,
press More and then press
Add to Speed Dial or
Add to One Touch Dial.
(See Storing One Touch numbers
from Outgoing Calls or Storing
Speed Dial numbers from Outgoing
Calls in chapter 5 of the Advanced
User’s Guide.)
 If you want to delete the number from
the Outgoing Call history list, press
More and then press Delete.
Press Yes to confirm.
e Press Stop/Exit.